Schuck 3D PrintsLog in

Getting started with 3D printing

3D printing is easier than it looks. You need three things: a printer, filament (the plastic), and a free program that turns a design into instructions for the printer.

The printer

I print everything on a Bambu Lab A1. It sets itself up, levels itself and is quiet. The Combo adds the AMS lite, which holds four spools and switches colours by itself. That's how the menorah and keychains come out in more than one colour without stopping.

Filament

  • Start with PLA. It's the easiest plastic to print and doesn't smell.
  • Get 1.75 mm filament (that's what the A1 uses).
  • Start with a 4-pack of colours. Add single colours later when a print needs one.
  • Keep spools in a closed bag or bin when you're not using them. PLA that soaks up damp air prints stringy.

Single colours, magnets and the rest are on the Supplies page.

The free software

Download Bambu Studio on your computer, or use the Bambu Handy app on your phone. Open a .3mf file from this site, check the colours, and press Print. The settings are already saved in the file.

Your first print

  1. Wash the build plate with dish soap and warm water, then dry it. Finger oils are the most common reason prints don't stick.
  2. Load the filament and let the printer run its calibration the first time.
  3. Start with something small, like one keychain letter.
  4. Watch the first layer. If it sticks flat, you can walk away.

When something goes wrong

  • Doesn't stick: wash the plate again, and make sure the plate is clean where you touch it.
  • Hairy strings: the filament is damp. Dry it, or try a new spool.
  • Corners lift: keep the printer away from drafts and air conditioning.

Prints can crack or fail, and small parts and magnets aren't safe for little kids to put in their mouths. Use your judgment.

Next

Pick a design from the home page and try it. If you want a print but don't have a printer, use Request a print.

As an Amazon Associate I earn from qualifying purchases. It doesn't cost you anything extra.